The ALLU AC 5-17FD is a purpose built screener crusher bucket for skid steers that enables often troublesome demolition materials and construction debris to be effectively reduced onsite and less material sent to landfill. 

By crushing and recycling materials onsite also reduces the need for virgin materials. 

Due to its compatibility to skid steers the AC 5-17FD is commonly used in urban and semi urban job sites where the space is an issue. 

Quickly change the material output size

The AC 5-17FD has a unique feature allowing the discharge size to be changed in 3 to 5 minutes by simply removing the adjusting pin in the back and repositioning it to one of the numbered holes on the frame.

Less jamming and bridging

Another unique feature of the AC 5-17FD is its jaw that can be run in both directions; forward mode for dry material and reverse mode for wet material specially for asphalt crushing. Reverse mode allows the jaws to keep it clean, which helps avoid jamming or bridging of the materials. With the bottom eccentric jaw movement material can flow freely through the jaws increasing the capacity of the material output.

Features - AC 5-17FD for skid steers

• Reduces volume by crushing it down to 6 different sizes starting from 0-15 as smallest fragment size to 0-75mm the largest fragment output
• Long lasting jaw plates
• Works in two directions; forward mode for dry material and reverse mode for wet material specially for Asphalt crushing. Reverse mode allows the jaws to keep it clean
• The new system of dampeners reduce the noise and vibration to the machines resulting in operator comfort
• Direct drive motors hydraulics resulting in less belts and maintenance of the belts
• Designed in a way that allows the operator to park the crusher on the ground and open the front door of the skid steer loader

Applications

• Demolition
• Excavation
• Construction
• Utility and Road Works
• Concrete Waste Recycling
• Crushing & Recycling Bricks, Ceramic etc.
• Asphalt Recycling
• Waste Rock Handling

Full Specs